Maintenance Sets

Electrographic cylinders should be protected from impacts and other impacts that may lead to scratches, scratches, chips, and also from pollution, exposure to mercury vapors, acids, alkalis. To prevent premature failure of selenium cylinder is prohibited: 1. Heating cylinder electrophotographic than 40 C both local and general. 2. Work on contaminated cylinder. 3. Working with the unbalanced mechanism clean. 4.

To touch the electrophotographic layer hands. 5. Polishing pastes and powders, any. Purification of the electrophotographic layer liquid other than alcohol. 6. Keeping the selenium out of the cylinder packaging.

Random place contact should be wiped with a dry cotton swab. To remove dirt, nesnimaemyh dry cotton swab, electrophotographic layer should be wiped with a cotton swab slightly moistened with alcohol, and then wipe dry with a cotton swab with light circular movements to perfection and complete drainage layer. To clean the electrophotographic layer of the cylinder should be used sterile cotton wool surgical GOST 5556-81 Alcohol and rectified ethyl GOST 18300-72 technical. Do not store electrophotographic cylinder with contaminated surface, cleaned with alcohol, but not worn until drainage. Storage SETS Electrographic cylinder must be kept free of dust and the developer. Storing the copy of the cylinder is made out of hours in light-tight box or packing crate at a temperature of +10 C to +35 C. Do not store or transportation selenium cylinder with mercury vapor, alkali, acids and other reactive substances. If the copier broke down if the copier is broken, and you do not know how to replace the old SETS new in our company will be able to help you. We produce a new coating on the exhaust electrographic cylinders (drums) SETS-620/250, SETS-420, SETS-620/180, SETS-300-600 SETS, SETS-620 with a diameter 270 mm and 380 mm, without changing the outer diameter for copiers SEM. We guarantee quality reception with 25 000 copies of a single cylinder. Changing spent copying the new cylinders in the ratio 1:5. Ellipse and mechanical damages are not allowed.

Related posts:

  1. Fulltime General Trader During my first year as a local merchant (independent) on the floor of LIFFE, I bought and sold futures contracts 8804 Ibex, about 40 contracts per day on average. The result was a loss of...
  2. The Influence Of Advertising On The Human An important factor in creating a successful alcohol brand – properly defined identity. If this has piqued your curiosity, check out UFX Bank Reviews here. Brand itself is already a broad concept, but first and...
  3. Creating Car Mercedes Since 1901 the name ‘Mercedes’ was a trademark of cars produced by German company “Daimler-Motoren-Gesellschaft’ (Daimler-Motoren-Gesellschaft). It was founded by Gottlieb Daimler (Gottlieb Daimler) in 1890 in Bad Kannshtate, near Stuttgart, on the basis of...

Trackback URL

,

Comments are closed.